Sankalp Alloys Overseas wide suppliers of Hastelloy Alloy C2000 Sheets & Plates, which comes to the shortcoming of warm sufficiency and weldability. Mechanical ventilation is reasonable for Hastelloy C2000 Plates and, under unambiguous conditions like an astoundingly confined space, is fundamental during welding or cutting errands, or both, to hinder possible receptiveness to perilous exhaust, gases, or improvement that could occur. The proposed start temperature for hot social occasion is 1232 Degree C (2250 Degree F) and the recommended finish temperature for Hastelloy C2000 Circles is 954 Degree C (1750 Degree F). Alloy C2000 Plates is outstanding among the flexible nickel-chromium-molybdenum materials in having a deliberate copper development. To decrease the precipitation of second stage in the power affected welding zones of alloy C2000 Circles, high between miss temperatures to 93 Degree C is valued. Nickel C2000 Sheets has extraordinary mechanical properties at high temperatures, basic for unending air transportation and high temperature applications.
The blend of Molybdenum and Copper in Nickel C2000 Plates give splendid use affirmation from diminishing media, while the high Chromium content gives unprecedented oxidizing check. Nickel C2000 Turns show low segment ascribes, subsequently adequate joint access (weld point) and superfluous land are suggested. Unequivocally when experts are creating gear for Hastelloy UNS N06200 Sheets that can navigate the concentrated solicitations that substance overseeing can put on a machine, every one of the particular pieces inside the machine really should can hold up for a surprisingly long time.
Hastelloy C2000 Sheets, Plates & Coils Specification
Specifications : ASTM B575 / ASME SB575
Standard : ASTM, ASME and API
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 1.0mm – 200mm
Range : 5 mm To 50 mm thick in 1000 mm TO 1250 mm width & 2500 mm Length.
Production : Hot-Rolled (HR) / Cold-Rolled (CR)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Grade :Hastelloy C2000 Sheets, Plates & Coils UNS (N06200), DIN (2.4675)
JIS NW 6200 Hastelloy® Sheet, Plate, Coil Equivalent Indian Standard
|
STANDARD |
UNS |
WNR. |
|
Hastelloy C2000 |
N06200 |
2.4675 |
ASTM B575 Hastelloy C-2000 Hot rolled Sheets, Plates & Coils Chemical Alloyion
|
Grade |
Ni |
Mo |
Cr |
Fe |
W |
Co |
Mn |
C |
V |
P |
Si |
|
Hastelloy C2000 |
Remainder |
15.0-17.0 |
14.5-16.5 |
4.0-7.0 |
3.0-4.5 |
2.5 max |
1.0 max |
.01 max |
.35 max |
.04 max |
.08 max |
ASME SB575 Hastelloy® Alloy C2000 Cold Rolled Sheets, Plates & Coils Mechanical Properties
|
Grade |
Tensile Strength |
Yield Strength |
Elongation at break |
|
Hastelloy C2000 |
690 MPa |
310 MPa |
45% |
For More Information :
Visit Our Website: https://sankalpalloys.com
Contact No: 91-8828369483
E-Mail ID: parth@sankalpalloys.com
